This is a public Discussion Forum  public

Topic

    Sam Drazin
    Network Settings for Shure Devices
    Topic posted July 22, 2014 by Sam DrazinExpert, last edited August 8, 2014, tagged how-to 
    3934 Views
    Title:
    Network Settings for Shure Devices
    Description:

    Find instructions to access and modify the networking menus for networked Shure devices below.  

    This page will provide instructions for the following tasks:

    • Set IP mode to Automatic (or DHCP)
    • Set IP mode to Manual (or Static) and specify IP Address and Subnet Mask
    • View current IP settings for networked Shure device

    UHF-R

    UHF-R receivers, including UR4S, UR4D, MW4S, and MW4D
    UHF-R IMAGE

    Automatic IP Addressing

    1. From the front panel menu, select: Util > Network.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select DHCP.
    3. Press ENTER to save.  

    Manual IP Addressing

    1. From the front panel menu, select: UtilNetwork.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select Manual.
    3. Press the control wheel to select the next value, and rotate the control wheel to change the value of the selected item.
    4. Press ENTER to save.

    Axient

    Axient devices, including AXT400 and AXT600.
    AXIENT IMAGE

    Automatic IP Addressing

    1. From the front panel menu, select: Util > Network.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select Automatic.
    3. Press ENTER to save.

    Manual IP Addressing

    1. From the front panel menu, select: Util > Network.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select Manual.
    3. Press the control wheel to select the next value, and rotate the control wheel to change the value of the selected item.
    4. When finished, press ENTER to save.

    ULX-D

    ULX-D receivers, including ULXD4, ULXD4D, and ULXD4Q.
    ULX-D IMAGE

    Automatic IP Addressing

    1. From the front panel menu, select: DEVICE UTILITIES > NETWORK > SHURE CONTROL > NETWORK.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select AUTOMATIC.
    3. Press ENTER to save.

    Manual IP Addressing

    1. From the front panel menu, select: DEVICE UTILITIES > NETWORK > SHURE CONTROL > NETWORK.  The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select MANUAL.
    3. Press the control wheel to select the next value, and rotate the control wheel to change the value of the selected item.
    4. Press ENTER to save.

    QLX-D

    QLX-D receiver (QLXD4).
    QLX-D IMAGE

    Automatic IP Addressing

    1. From the front panel menu, press and hold the enter button and then press the menu button to access the advanced menu.
    2. Press the menu button to navigate to the IP menu.
    3. Use the arrow buttons to set the mode to "Au" (for Automatic).
    4. Press enter to save.

    Manual IP Addressing

    When setting an IP address, each section of IP address must be edited individually. The following diagram show how each group is mapped to the receiver display.

    1. From the front panel menu, press and hold the enter button and then press the menu button to access the advanced menu.
    2. Press the menu button to navigate to the IP menu.
    3. Use the arrow buttons to set the mode to "St" (for Static) and press enter.
    4. Use the arrow buttons to edit the first group. Press enter to save and continue to the next group.
    5. Edit the remaining 3 groups by using the arrow and enter buttons.
    6. When group 4 has been edited, the display will show the subnet mask menu. Use the arrow buttons to select a preset value for each of the subnet groups.
    7. Press enter to save settings.

    PSM1000

    PSM1000 transmitter (P10T).
    PSM1000 IMAGE

    Automatic IP Addressing

    1. From the front panel menu, select: Util > Network > Setup. The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select Automatic.
    3. Press Enter to save.

    Manual IP Addressing

    1. From the front panel menu, select: Util > Network > Setup. The current IP settings of the device are visible from this menu.
    2. With the mode selected, turn the control wheel to select Automatic.
    3. Press the control wheel to select the next value, and rotate the control wheel to change the value of the selected item.
    4. Press Enter to save.

     

    © 2009-2014 Shure Incorporated All rights reserved.
    • Privacy
    • Powered by RightNow