This is a public Discussion Forum  public

Topic

    xoft
    WWB6 not seeing all devices
    Topic posted February 3, 2012 by xoftNovice, last edited February 3, 2012 
    167 Views, 2 Comments
    Title:
    WWB6 not seeing all devices
    Description:
    This is my first day with WWB6.2.1.34 I have watched the set up tutorial. All of my G1 band devices show up. The J5 device does not show up.
    Everything shows up fine when I launch WWB5.
    I am using a 27" iMac 3.06 GHz Intel Core 2 Duo with 10.6.1 the devices are all UR4D on a wired ether net.
    Thanks!

    Answer

     

    • Sam Drazin
      ...All of my G1 band devices show up. The J5 device does not show up.
      Everything shows up fine when I launch WWB5.
      I am using a 27" iMac 3.06 GHz Intel Core 2 Duo with 10.6.1 the devices are all UR4D on a wired ether net.
      ...


      Hi Terry, do you know the firmware versions of all your UR4Ds? It is displayed on the start-up screen underneath the Shure logo when you reboot the device.

      There is a required minimum firmware version of 1.166 for all UR4 receivers, as noted on the Downloads page. Perhaps the J5 unit is the only one out of date?
    • xoft
      Thanks Sam
      They were actually all out of date. The J5 was just the worst. The problem was with me. After reading your posting guidelines ( Thank You) I started looking at the Firmware on all my UR4D's. I didn't even know where to find it, until I found the link on updating them. I had to go back to WWB5 to update them. JD got me squared away. Now I have all next week to play with the program. Thanks for your Help!
      T

     

    © 2009-2014 Shure Incorporated All rights reserved.
    • Privacy
    • Powered by RightNow