This is a public Discussion Forum  public


    Can WWB ignore 2TX-7, 2TX-9 and 3TX-3 while calculating
    Topic posted November 11, 2014 by LavegliaBeginner 
    111 Views, 1 Comment
    Can WWB ignore 2TX-7, 2TX-9 and 3TX-3 while calculating

    Can WWB ignore 2TX-7, 2TX-9 and 3TX-3 results while it is calculating a solution? I see where it can ignore these frequencies while analyzing results but can't see a way for it to ignore these calculations while it is working a solution.



    • Sam Drazin


      Typically, when you use the "More Frequencies" Compatibility Level (selectable in the RF Coordination Results dialog), the 2T7O, 2T9O, and 3T3O IMD spacing considerations are zeroed out.  You can confirm this by selecting Tools > Equipment Profiles, and selecting Manufacture/Model/Band of the device in question, and viewing the coordination data used on the "Filtering and Intermods" tab.

      If you want, you can also modify these profiles, but they must be saved as new equipment profiles (with altered manufacturer or model names) so they are differentiate-able from the stock profiles provided by Shure.

      I hope this helps.  Let me know if you have further questions!



    © 2009-2014 Shure Incorporated All rights reserved.
    • Privacy
    • Powered by RightNow