Comments

  • 1-6 of 6
  • Szuhimi
    Thanks Brian, but I have already tested these. Best regards, Imre
  • Szuhimi
    Thanks Sam,

    Only, I'm wondering a little, because I use XP - OS and not Win7
    So, it means do I use DHCP server and/or change laptop.
    Best regards,
    Imre
  • Szuhimi
    Hi Sam,

    Thanks your answer.

    Both of them are our own receivers, no more than 1 year old products, they are the "rests" at this moment of our demo products.
    They works under my hands only, even if it means live concerts also, but never went like rental products.
    I rechecked again, firmware is up to date 1.167 on both one.

    I went across step by step on your both recommendation.(I switched off firewall, no depend on, because I took WWB files into exeptions)
    Ping test is good, also I received answers in every case (32 bit versions).
    I uninstalled WWB6 and installed again, I have reboot my laptop...
    I tested with different IP adress, no depend on IP adress (of course good IP-s needs for all equipments)
    I checked with only one UR4D and my laptop wired with Ftp cable, the result is exactly the same, as before. WWB5 see the UR4D-s at every time, WWB6 never. (WWB6 see the network - green field on the right bottom corner with 0 equipment - means, I have connection)
    I send you details about my application:

    My laptop is (Asus F5RL, Intel Core Duo CPU
    T5750@ 2.00GHz, Microsoft Windows XP Pro 2002, Service pack 3)

    Fix IP: 192.168.001.100.
    UR4D -G1E 192.168.001.107, dev id: 1
    UR4D -H4E 192.168.001.108, dev id: 2
    P10T-G10E 192.168.001.200, dev id: 0
    Every equipment subnet mask has 255.255.255.0
    Switch T-Link 16 port (very simply product) is this possible problem ?
    This is not DHCP server and WWB5 on my laptop could manage the receivers (any receiver from last two years) with fix IP, only. - It was never success ran at DHCP mode with my laptop.
    Do you have any idea, for e.g. change my laptop for another one.

    Thanks,
    Imre
  • Szuhimi
    Hi Ron,
    I "played" with equipment whole yesterday afternoon and evening.
    I tested firstly with same firmwares on both, later I've changed and leave on different (G1E- 1.166, H4E - 1.167) the final result is same at every settings)
    Strange, that WWB5 (included equipments) doesn't sense for "software change" (open and close WWB-s) its find all the time UR4D-s with fix IP, but WWB6 most sensitively (for e.g. pull out and conneced again ftp plug ...WWB5-has neverproblem)
    And IP-s: I use fix IP-s at every place. My laptop is on 192.168.001.100.
    UR4D -G1E 192.168.001.107, dev id: 1
    UR4D -H4E 192.168.001.108, dev id: 2
    P10T-G10E 192.168.001.200, dev id: 0
    Every equipment subnet mask has 255.255.255.0
    Switch T-Link 16 port (very simply product)
    I changed ftp cables,also. I have no more idea.

    Thanks,
    Imre
  • Szuhimi
    Sorry Sam, after the P10 upgrade - it works with WWB6, but UR4D doesn't.
    Thanks,
    Imre
  • Szuhimi
    Hello Sam,

    I use WWB 5.0.5.2, it works pretty nice from years.

    I made firmware upgrade from 1.162 (and 1. 166) to 1.167 - regarding UR4D-s.

    Unfortunately, these UR4Ds and P10T are not visible for WWB6.
    I use fix IP adress, I have established IP connection, via ethernet switch - "0 device online" - sign, at the right bottom in WWB6.
    What do you offer me, resolving this problem ?
    Thanks,
    Imre
© 2009-2014 Shure Incorporated All rights reserved.
  • Privacy
  • Powered by RightNow